If the instrument cluster in your Chevrolet Blazer is malfunctioning, the commonest concern is the instrument cluster fuse. Changing the fuse will thus normally treatment the scenario. If the fuse isn’t the drawback, then the subsequent finest answer is to easily change the total instrument cluster. Alternative instrument clusters might be bought on-line or out of your native Chevy dealership. As the instrument cluster accommodates numerous devices and gauges important for working your Blazer, you need to at all times be sure that it’s in working order.
Chevy Blazer Repair the Instrument Cluster Instructions
Changing the Instrument Cluster Fuse
1. Turn off the engine of the Blazer.
2. Take away the cowl of the instrument panel fuse-block by rotating the plastic fastener on the cowl to the left. Substitute fuses and the fuse extractor tool are positioned on the underside of the cowl.
3. Use the fuse extractor to remove the fuse in slot 4. That is the instrument cluster fuse.
4. Set up a substitute 15A fuse and reattach the cowl to the instrument panel fuse-block.
Changing the Instrument Cluster
5. Open the hood of the Blazer and, utilizing a socket wrench, remove the negative battery cable.
6. Take away the two screws on the underside of the higher dash panel above the instrument cluster. Take away the higher dash panel.
7. Take away the two bolts securing the instrument cluster to the Blazer. Slide the cluster in direction of you and attain behind it to disconnect its electrical-connectors. Pull the cluster out of the car.
8. Place the alternative cluster into the Blazer and reconnect the electrical-connectors. Reinstall the bolts and reattach the higher dash panel. Reconnect the battery.
Read more : How to Repair the Chevy Blazer Instrument Cluster